Vox VE CD Copperhead Drive

Amp makers from across the pond are responsible for some of the most fantastic plugged-in tones of all time. That massive, crunchy sound is what Vox had in mind when they created the Copperhead overdrive pedal. This pedal is much more than an amp in a box, though. It relies on a Vox Nutube and all-analog circuitry to create full-throated tones that could even make Yngwie jealous. You get an active 3-band EQ and Bright switch for tone shaping, along with standard Gain and Volume controls. So you can see how your signal is affected, Vox also included a built-in OLED display with an oscilloscope. Complete with three operating modes and switchable all-analog cab emulation, the Vox Copperhead is ready to punish your speakers with its venomous bite.


INPUTS/OUTPUTS

INPUT jack, OUTPUT jack, DC9V jack, LINK jack

CONTROLS

GAIN knob, VOLUME knob, TREBLE knob, MIDDLE knob, BASS knob, BRIGHT switch, MODE switch

POWER SUPPLY*

1 x 9V alkaline battery or 9V center negative AC adaptor

*: The use of an AC adaptor is recommended as the unit’s power consumption is relatively high. Should you prefer to use batteries, please use the alkaline type.

CURRENT CONSUMPTION

95 mA

BATTERY LIFE

Approx. 2 hours (When using the alkaline battery. This figure will vary depending on the actual conditions of use.)

DIMENSIONS (W X D X H)

72 mm x 120 mm x 55 mm/2.83″ x 4.72″ x 2.17″ (Including the switch and foot rubber)

WEIGHT

350 g/12.35 oz. (Excluding the battery)

INCLUDED ITEM

1 x 9V battery for checking operation

ACCESSORIES (SOLD SEPARATELY)

AC adaptor